Luckily, I was able to pull out the hard drive and plug it in elsewhere to ensure that I hadn’t lost any hard drive data. What little fortune I had today was in discovering that the hard disk itself was fine.

This left me with a dead computer, a good hard drive, and no way to run the drive.

Enter P2V. Using WinImage or any other tool that can convert a drive into a .VHD file, I managed to create an image of my notebook’s drive into a standard VHD.

At this point you may have read about HAL issues when using the VHD, blue screens and other horrific stuff. I was able to ignore all of these issues simply by creating a virtual machine in VirtualBox (not VMWare, Virtual Server or Hyper-V). VirtualBox now supports VHDs, so it’s simply a matter of creating a new VM, and using your VHD as an existing drive.

I was able to boot up without problems, and Windows 7 in the VM automatically downloaded all the new drivers I needed (such as the VM audio card, network card, etc.). Installing virtual additions also works. It doesn’t get any easier than that!

Yes yes… I know you’re scared… let the VM frenzy begin!

OC Remix isn’t new–the community has been releasing content for years now. Did I mention all of this is free? Check out the compilations and albums they’ve got for download (I can get over 1MB/sec downstream via the torrents on their page). Most releases come as MP3s and fully lossless FLAC or WAV for ear-bursting glories.

If you’ve played Street Fighter II Turbo HD Remix, the soundtrack was created by OC Remix artists (I bought this game for XBox360 Live Arcade and came to the sad realisation that my aged reflexes can no longer pull of Hadoukens with the best of ‘em…).

Here are a few albums and tracks which I have particularly enjoyed in recent years:

Album	Listen!	Released
Kirby’s Adventure: Rise of the Star	Free Breezin’ – Theme of Son of Wind	2005
Final Fantasy VII: Voices of the Lifestream	Full Frontal Assault (Let the Battles Begin!) Nomura Limit (Fight On!)	2007
Super Street Fighter II Turbo: Blood on the Asphalt	Mercenary Boxing (Balrog Stage)	2007
Doom II: Delta-Q-Delta	MAP08: The Duel (The Dave D. Taylor Blues)	2008

1. Install Cygwin in the normal way. Make sure you’ve got openssh and cygrunsrv as selected packages to install.
2. Right-click the Cygwin shell icon, and Run as administrator.
3. Run ssh-host-config. Follow the prompts carefully: if needed, it will tell you which permissions you need to set and where. Remember to say yes to privilege separation: it will create a user for you called cyg_runsrv which all cygwin services will run under in Windows 7.
4. You should be able to start the service using cygrunsrv –-start sshd, or by starting it as a normal service under Administrative Tools > Services.
5. This does not automatically create and open firewall rules, so you will have to do this manually.

I’m presented with this lovely pop-up:

Not very Enterprise-ready now, is it, guys?

I’m writing to thank you for registering and using Microsoft Popfly. I’ve been fortunate enough to see all the innovative mashups, Web pages, and games created by the Popfly community since we launched Popfly two years ago. It has truly been a pleasure to watch the spirit of creativity flow through a growing Popfly community over the life of the product.

It’s with a heavy heart that I share some news with you today: on August 24, 2009, the Popfly service will be discontinued and all sites, references, and resources will be taken down.

After August 24^th, your access to your Popfly account, including any games and mashups that you’ve created, will be discontinued. However, Microsoft is still very much dedicated to helping you express your creativity and pursuing a path to software development. If you’re interested in refining your skills in Web applications, please visit Microsoft Web Platform Installer. For those interested in programming on the Xbox, then please visit Microsoft XNA or Microsoft Kodu. And for those who are interested in Windows programming, please visit Microsoft Express.

Thanks again for your support and please don’t hesitate to contact us at popfly@microsoft.com if you have any questions.

Regards,
John Montgomery
for the Popfly Team

 

Financial crisis et al, I suppose.

This post is based on the Singularity RDK 2.0 images and source, which are available here: http://www.codeplex.com/singularity.

Singularity can be run fairly easily. You can also roll your own, and compile Singularity from source.

What you will need:

• Singularity RDK 2.0 ISO image.
• Singularity RDK 2.0 sources: if you wish to compile from source.
• A machine: physical, or virtual*.

* I’ve used Microsoft Virtual PC Beta on a Windows 7 7100 x64 host machine. I’m told it works for Virtual PC 2007. I was unable to get it working with VMWare Server 2.0.

Running Singularity

• Download the ISO image.
• Burn it to a CD, or save to a location mountable for your VM.
• Boot the ISO.

You now should have Singularity running, using the default build. If you just wanted to look gangsta–mission accomplished, take your screenshots and begin bragging to on web forums:

However, if you want to explore the OS (such as it is), read on.

What the Hell is This, Min?

OK, don’t panic. Looks daunting, I know. Acquaint yourself with this little gem, for starters: “Singularity_RDK_2.0_Source\docs\Design Notes\SDN87 RDK Applications Guide.pdf“. It is from the RDK 2.0 source download, and will give you a good idea of how to use Singularity commands.

Some commands:

• help: display all commands.
• dir.
• start.
• ipconfig @show: display status of all NICs.
• dns @show: display DNS settings.
• seditor: an EDLIN-like editor.
• sc @show: show status of all services.
• tasklist: show list of all tasks.
• jobs: show a list of all jobs.
• fg n: foreground job number n. Use ^C to quit the job.
• shutdown.

Backgrounding:

Use & to run programs in the background. You can ^Z halt processes, then use bg n to background it.

Compiling From Source

The source comes with a PDF: Building and Running Singularity RDK 2.0.pdf. Read it.

Essentially you follow the instructions as given in that document:

• Get the prerequisites for the environment.
• Run “configure.cmd”.
• Delete/rename the directory “Singularity_RDK_2.0_Source\base.obj”, if it exists.
• Run the “Singularity RDK 2.0” desktop icon which will bring up a command line prepped for building Singularity or debugging it.
• At the prompt, type as below to build Singularity World distro:
  …\base> msb Distro\World.proj
• If it dies saying it couldn’t find a directory within “Singularity_RDK_2.0_Source\base.obj\MSBuildLogs\6\…”, don’t worry. Go into that MSBuildLogs directory and create the 6 directory. Now the MSBuild should work.

• You can find generated ISO image for your build in “Singularity_RDK_2.0_Source\base.obj\Distros”.

If you modify any .scripts, for example, you may wish to recompile to include the modifications on an ISO; you just repeat the above process after making your changes to “C:\src\Singularity_RDK_2.0_Source\base\Distro\Scripts\startup.script”, for example.

As a rough benchmark, it takes me 10-15 minutes to build World on a quad core with 8 GB memory.

Networking

Aye, it works.

If you’re ultra-lazy, just do the following:

Singularity>ipconfig @dhcp /dev/nic0 start

This should get you going with DHCP. It’ll poll the DHCP server for DNS servers too.

You can set a static ip thusly:

Singularity>ipconfig /dev/nic0 192.168.1.99 255.255.255.0 192.168.1.1

The format is ipconfig <device> <ip> <netmask> <gateway>.

Remember that if you set a static IP using ipconfig, you will need to tell Singularity which DNS servers to use, check the dns command.

Enabling VESA

Edit the file “Singularity_RDK_2.0_Source\base\Distro\LegacyPCDistro.xml“.

Enable the line:

<driver name=”S3Trio64″ />

Recompile, and you’ve got VESA.

I prefer without VESA as it has a handy thread statusbar at the top of the blue screen, which is apparently gone in VESA mode. Pity.

FAT drives

For FAT support open your Distro build file (i.e., “Singularity_RDK_2.0_Source\base\Distro\World.proj“), add the following line:

<Application Include=”$(SINGULARITY_ROOT\Services\Fat\Control\FatControl.csproj”/>

Recompile, and you’ve got FAT support.

Make sure you’ve partitioned your FAT drive beforehand. You should be able to see it listed in the /dev tree.

Now, you can @format, @mount and @unmount your FAT drive using fatcontrol.

.script files and customizing startup.script

If you are serious about using Singularity, you will likely want to modify your init/startup.script. The best way to do this is to edit this on your host machine, then msb.

Note that you will have to put ‘single quotes’ around all arguments. For example, the shell command hostname -n=paddington (this changes the machine’s hostname to “paddington”) would be put in startup.script as:

hostname ‘-n=paddington’

There are plenty of examples in the RDK for you to get started with. Here is Singularity booting up, setting hostname, a DHCP connection, a static IP, and mounting a FAT drive:

Jobs

If you try to reboot or shutdown while there are jobs, Singularity will freeze. Nice. For now, just remember to kill all your jobs by foregrounding them (jobs, fg n, ^C).

Developing in Singularity

Read this thread which discusses the best way to develop for Singularity: http://singularity.codeplex.com/Thread/View.aspx?ThreadId=23669.

A quote:

copy an existing project like …\base\Applications\Hello\

to …\base\Applications\MyProj\

cd …\base\Applications\MyProj\

rename .cs and .csproj files, edit them for content.

msb MyProj.csproj (until it compiles)

back to …\base

edit distro\tiny.proj and add a line for your app

<Application Include=”$(SINGULARITY_ROOT\Applications\MyProj\MyProj.proj”/>

msb distro\tiny.proj

In general, I’ve found the process to be fairly straightforward, once you get the hang of it. I would recommend you compile a World distro, and keep the base.obj directory. Now, go into the base directory, and edit your sources/files.

The next time you msb the distro, it will only recompile/update the changed files. This is a pretty quick way to edit the scripts, and not too long if you are coding.

As a benchmark, it takes less than a minute for me to msb world, if I’ve made changes to 1 or 2 code projects within the source tree:

Debugging with WinDbg

Create a named pipe to COM2, and you can call the debugger using “dbg.cmd /pipe”.

Now, when you start up your Singularity VM, it will automatically output the debug to WinDbg:

Caveats

• Some example applications are buggy/not working.
• US keyboard layout only? I couldn’t find a way to change this anywhere in the source.
• Couldn’t get the /dev/audio device with Virtual PC Beta.

Demo Server

I have set up a demo Singularity web server, details here.

Having had problems with my ISP’s modem/router/firewall/wireless device, I wanted to bridge to a separate device to handle the routing, firewall and wireless.

I have been using a Linksys WRT54G version 1 for this task. The firmware had to be flashed with DD-WRT, which is a pretty good firmware all in all, but seemed to be stretching the limits of the version 1 WRT54G.

The vintage DD-WRT build, which is the appropriate flavour for the WRT54Gv1 is a stripped-down version of DD-WRT which doesn’t contain some of the newer features. Although it was fairly stable, it got slow and unresponsive at times over wireless, and had some trouble maintaining long-term RDP sessions over wireless, dropping the connections maybe twice an hour for a minute or so each time. Although QoS may have been an issue, my clever rebuttal is that “it doesn’t work for me out of the box”: I’m lazy as fuck, what do you expect?

All in all, DD-WRT worked better than the Speedtouch 780 as a router, and better than the stock Linksys or OpenWRT firmwares. My main problem with DD-WRT was that for some black magic voodoo reason, the XBox 360 was unable to join the wireless network. It could detect it, discover encryption method, but was unable to connect to the network no matter how hard I tried, no matter how hard I cried into my pillow.

After acquiring some expert/professional advice (i.e., googling the interwebs), I installed tomato the other day, and lo and behold—the XBox was able to connect without problems. Tomato seems more responsive than the DD-WRT thus far, which is another bonus.

I’m not sure about the newer WRT54G models, but if you have a version 1, you may want to consider using tomato rather than the stock Linksys, DD-WRT or OpenWRT firmwares.

The fireworks used to go off in Leicester Square every few hours, and the police would control the number of people in the area. This year, they decided to do only one show of fireworks, right before the end at 6pm.

The Dragon dancing through Chinatown had babies and we ended up seeing 3 or 4 different dragons, each causing a human traffic jam… pretty well planned guys.

Pure quality shot.

Mad mafia boss protection.

Requirements:

• Sparc (tested on UltraSparc 10)
• Debian image
• ISO burning software
• Monitor and keyboard for Sparc (alternatively, run from serial terminal—serial cable required for this).

Instructions:

1. Download the debian sparc netinst iso image.
2. Burn the image to CD.
3. Put the CD into your Sparc.
4. Power off the Sparc.
5. Plug in keyboard, mouse, and monitor.
6. Power on the Sparc, you should see the POST and the machine initializing memory check.
7. Hit STOP-A. You will be brought to the “ok” prompt.
8. type “boot cdrom”.
9. Run through regular Debian setup process.

That’s it.

You may want to read this previous post for installation caveats regarding MBR, SILO, and serial terminal install.

Poet, wrestler, manager, a true renaissance man in his bloom.

Now that WordPress has a decent CAPTCHA facility for comments, maybe I’ll stop getting blasted with Viagra ads by robots—we’ll see… it’s a new year, full of incredible possibilities…

So long csoft blog, and thanks for all the phish(ing).

Three hundred odd megabytes of IRC banter…

-rw-r–r– 1 art art 332202514 2008-02-20 23:50 irc.log.2004.2008

… which is a mere 6.74 million lines …

6747292 lines

… process wildly for about an hour at gas mark 6 …

real    62m19.124s
user    10m46.532s
sys     0m9.589s

And out come a few tasty treats:

Buy a gay Gangsta / The ass down; dead sexy G / arfer gotta reboot computer / Well you don’t have a beard! / Lisa is not too, unstoned / im jackie chan takeover never even if u want / Aftermath, prevention.  Full paychecks Fraggle. / Cnn, was real sickening robcool. / hehe stupid cockos stupid calculus? / Elm: what he came to finish your asscrack / A Leetle HAHHHHHHSSSHHH! / digit null: has attained level in stupid / more in theory of my fire slowing the connection / I can shoot it fack / Its fuckin gets your fuckin nick now / Next level Next year Robcool.  Badapbapbapbap / …

Kinda bit depressed; unwanted

… / And all go once and bait, etc, clarkee. / stripey fuq all of idlerpg. / Unf Unf unf unf centry tastes arf clean it appears / Though.  Fighting kobi: pescado namssa. Crazy, weepy tooof; / die, jimmy. / ubuntu linux is now online stuff / Fncypntz: hotboxing the face (off signoff Vision and: a bowl accidental / the Worst thing is Seafood its a: depressed Robcool. / Bobsaget, the Council isn’t gay. / Might be about a south america asia jerk striphy / arf; damns i m fakeidler. / long Faggot taking picz unstoned unstoned imvfpisssed unstoned just communicate with you do my vibrator hookup. / Baub you’re tainted authority / i would be satisfied!  Fncypntz. / Yeah good luck to verruca / Rofl plus extras / I have to the bottom of the lunch time you can carry around with your cock in day making snickers / Look like having arf call you biatches has ill give; / I don’t support arfyarf: bbiaf / got in Iraq, Us the Connection reset by peer, Voltron got it rst / Those hot like a Differential equation / Deuce. / Three words you fixed zombie / Heheh pescado es bueno hay mucho Infamous / This world is first. / Tuck Tuck was like fuck / Ok enough of lies. / Well lookie IMPOTEEEENNNNCEEEE arfyarf. / penis join join to somewhere But I dont I suppose the americans smegma Rampage / Superfriends is you / But it’s crack house once i have corn flakes / there is arfer: ban him / Fag?  Werent lyin tumble.  Jimmy he could find anyone Want me / Bsd is now known as bloated / Lol meiso its tea joint lush and you enjoyed use Maxells flame flame, again did! / Gonna go for this brand of english men / It’s offical reunification was for valentines?  Whooo wouldnt smoke man! / tomorrow most of that be something Robcool; grapenuts; gooses. / Apmannen (reaches next level next level aznsensation)! / hahaha arf it’s arf so it sucked, apparently / Gay arf: arf. / Get laid tonight.  Oh my account. / So many many girls mad glad to the answer (these dried saliva produced stripey). / Aye man, this that was kicked from vagina?  Haha / girlies are into to stripey. / The level procrastinator, is supposed to tear down arf / …

I’m beginning to learn a few things more about my Sparc based on these scientific findings. I do believe he’s a raging homosexual, and a drug addict. Fascinating.

This guy has lately become so paranoid that he’s convinced that a neighbour nearby is actually a prison guard, and that everyone in our neighbourhood is conspiring against him.

He’s “caught” our neighbours talking to each other–obviously about him, what else could they possibly be talking about? The other day, he realized that they had trained all their cats and dogs to shit and piss on his garden. Also, apparently they wait for him to clean his garden, then throw junk into his lot.

They have also used pre-emptive strikes to “mess up” 5 chances he had with women (all of whom he seemed convinced he would marry). They also know when he is doing his Islamic verses and prayers (he’s trying to convert into the faith), and deliberately make things “unclean” for him, breaking in and touching his Koran, and so forth.

Also, the neighbours listen to his phone conversations, plan when he’s out to burgularise his flat up, and don his hoodie and track pants. He caught someone wearing his track suit once, yelled and threatened them until they ran off. When he got back home, he discovered that his place had been apparently entered into, and it seemed as if the clothes were put back hastily. No joke.

From what I know, our neighbours seem to be mostly families. This guy is a single thirtysomething spazz who can’t hold an honest job down for the life of him. Makes sense that they’d be mad envious and want to mess him up.

… did I mention he consistently reeks of burger grease smell?

Pure “I C, I C… /me nods head and looks at his watch repeatedly.” Woe is me, for I can’t be rid of dickheads.

$ cat `find /directoryname -type f`

SUA SP1 also works (and is more or less just as slow and shitty).

Anyhow, it’s somewhat exciting to have a moreso Server 2008-like kernel.

tabcal novalidate

import System.IO
import System.Net
import System.Net.Sockets

server = Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp)
server.Bind(IPEndPoint(IPAddress.Any, 8200))
server.Listen(1)

while true:
        socket = server.Accept()
        using stream=NetworkStream(socket, true):
                print(StreamReader(stream).ReadLine())

                writer=StreamWriter(stream)
                writer.WriteLine(“Ahoy, this server is running: ${shell(‘booc’, ”)}”)
                writer.WriteLine(“${shell(‘cat’, ‘/proc/cpuinfo’)}”)
                writer.Flush()

MSDN’s System.Net Namespace docs might could also be of use. I’ve tested this on sparc and x86 linux variants with mono.

Hope you find this useful, network programming seems to be a relatively familiar experience if you’ve done it before in another modern language, just took a little bit of scrounging to dig up.

Boo uses CLR threads, which generally map one-to-one to kernel threads and therefore exploit multiple processors and are fully preemptive.

In contrast, Ruby uses lightweight threads – threads implemented within the interpreter. Because of their extremely low switching latency, they can be used in situations where kernel threads impose too much overhead…[b]ut Ruby’s threads are limited to one CPU, and block on OS calls.

Microthreads can be implemented in user libraries, but only cooperative threads (as far as I know). I don’t know how important preemptive (within the hosted language) microthreads are. But the CLI (and therefore, Boo) seem to have no standard library implementation of lightweight threads.

All this is specific to the main Ruby implementation. JRuby, like Boo, relies on the underlying VM’s threading model – the JVM’s, in this case – and so its threads are generally fully preemptive and exploit multiple CPUs.

At the end of the day, I suppose comparing boo with ruby is a bit like comparing dicks to pussies, as ruby is an interpreted language through-and-through, whilst boo can be run, for instance using booi in interpreter mode, or using booc compile CLI bytecode binaries (which are absolutely tiny compared with, for instance, ruby2exe’ing a ruby project) to be run with mono/.NET or other CLR.

Also gotta love the mention of the JRuby: now we’re talking optimized best-of-breed solution. Lulz.

Headless mode install definitely works–here’s how:

1. Get your Linux media burnt. Ensure your bootloader settings support serial console I/O (I tried using a nightly ubuntu-server/sparc .iso).
2. Get your serial console working with your Ultra 10. You will need a DB9 (com) port, which is commonly called ttyb. If your sparc didn’t come with one, you can order them online.
3. You will need a null modem cable, and a terminal on the other end of the cable to capture I/O.
4. Boot via serial console, OpenBoot will load, at the “ok” prompt, type “printenv”. Take careful note.
5. Set any variables you need to, using “setenv” (i.e., to ensure your terminal settings are correct). Some useful ones: auto-boot?, boot, input-device, output-device, reset.
6. You can also do this in blind-mode: headless using a keyboard plugged in locally to the sparc, hitting STOP-A once the keyboard LEDs stop blinking, and setting output-device and input-device, for example, to terminal, or screen/keyboard.
7. Now that it’s all working, put in the Linux media, boot, and at the “ok” prompt type “boot cdrom”.
8. Install your distro. All the stock hardware should be supported. Make note that SILO (LILO for Sparc) has specific requirements in terms of the disk (it must be installed within the first gigabyte).
9. It failed during the ubuntu-server setup process. Continue it regardless and complete the installation process.
10. Reboot the cdrom, and enter rescue mode. Mount the drive(s) that you just installed, and install the silo package (i.e., using apt-get for debian/ubuntu). It installed without incident for me here.

This information was tested on an Sun Ultra 10, 440-MHz UltraSPARC IIi, 2MB external cache, 1GB memory, 3D card, 2 x 9GB disk drives.

Donate to boycott, of Yahoo, support the Us killing many Hamas attacks on his or libraries and various other things; or application the underlying message with A recording of a union of those and medicine for sponsoring this case article on Newsforge.

Support conscientious objectors in which is to help more Photos and institutions as the first extensible Emacs and the deadly attacks.

Light will collapse such as seen the event horizon.

Indeed, small black hole has been detected if var wgversion var wgnamespacenumber var wgaction view var wgbreakframes false.

Mathematical theory of finding a treadmill.

ISBN does Special relativity, but the black holes with the entropy.

Enterprise and enslaving Ferengi Alliance is the wheel and negative Jewish stereotypes.

You can in a necessity.

Never let the right to tarnish the wind; Small print leads to large risk.

Anything worth the product, the Vulcan greed for success.

Sleep can tarnish step on an honest businessman.

Gay Street in Dublin was the line was also be a Germanic
source History timeline gay: is primarily to behavior
homosexual, people, reject Labels gay the term Lesbian, LGBT
Portal lesbian or transgender.

Fascinating.

My Antec Notebook Cooler arrived bright and early this morning. The unit comes with two modes, quiet and not-so-quiet. Even with the lower fan setting, my laptop is idling at around 70 degrees C instead of 90-100 degrees C without the cooling unit.

I’ll be writing a detailed post on the Antec Cooler’s effect on CPU and HD temperatures in the near future, once I’ve tested the unit for a longer period. No overheats, yet.

Don’t miss the narrator’s play-by-play commentary either, pure welcome to the animal Olympics 2k8.

… I’d best be saving this bad boy for emergencies.